Your Cart



Jan 28, 2021


Luan Heslin

Would you like to make your own incense? Have a more personalised and spiritual connection to your incense? A sense of fulfilment? That you did this all on your own and you know exactly what is in it?!
 Discover how to make incense the way it’s been made by virtually every civilization since before the Stone Age; with fine natural incense resins, woods and herbs.


Incense making is a meditative and enjoyable way to exercise our creativity. It’s simple, inexpensive and awakens us to the pleasures of earth’s aromatic treasures and our interconnection with nature. Create recipes that purify indoor spaces, enhance dream activity, relax with a soft, smooth, calming mixture that eases the troubles of the day, or blend a warm, please the senses, sweet and seductive mixture to stimulate your sensuality for an evening of mystery and intimacy.

Incense has always been intertwined with religious ceremonies as well as the practice of medicine. In fact the first reported healing practices, recorded in ancient Egypt, exposed patients to the smoke of incense for healing.

Lets discover the ancient art of how to make incense.


Before you start, you will need to do a few things:

  1. determine the type of incense you’ll make
  2. determine how you will heat your incense
  3. gather tools
  4. gather ingredients
  5. pulverize ingredients (or use powders)
  6. mix ingredients
  7. perhaps there will be a drying or curing time
  8. heat ingredients and enjoyyyy!



  1. Combustible incense – used when forming your mixtures into cones or sticks by adding a binding material and a combustible material directly to the incense mixture (no reported explosions yet!). One end is lit, the flame then fanned out, allowing it to burn continuously by themselves. This incense is more difficult to make but easier to burn. Makes traveling with incense easy.
  2. Non-combustible incense (incense of the ancients) – “loose incense” (just the ingredients themselves, after grinding and mixing) or “incense pellets” (loose incense where soft resins, balsams, raisins or dried fruits and honey have been added to form pea sized “pellets”). This incense is heated using charcoal or makko powder. This is the easiest method of mixing incense but requires just a few more steps and utensils to burn.



  • If you are making cones or sticks then burning your incense is straight forward and simple; you light one end of the cone or stick, fan out the flame and allow it to slowly burn of its own accord. Note: In some cultures it is considered disrespectful to all that is nature to “blow” out the flame. This is the same with candles also.
  • If you are burning loose incense mixtures or incense pellets, then you’ll need charcoal or makko to heat your mixtures.
  • If you are burning incense outdoors; individual ingredients, loose mixtures and incense pellets can be placed directly in a small campfire (best when there are just glowing coals remaining, no flame) or on a hot rock on the outer rim of a campfire, etc.



This will vary by the “type” of incense you will are going to burn.

  1. Non-combustible incense (loose ingredients or pellets): usually a cup, bowl or saucer shaped vessel filled with ash or sand is ideal (can be made of wood, metal or pottery). Large sea shells, such as abalone, work well too.
  2. Combustible incense (cones, sticks, coils): again a cup, bowl, saucer or shell shaped vessel works well or one of the infinite number of specialty holders designed for this type of incense works great as well.



Lets look at three ancient methods for burning “loose incense” or “incense pellets”:

  1. Charcoal– here we light a piece of charcoal and set it in the center of our bowl filled with ash or sand. We sprinkle our incense mixture directly on top of the charcoal or right next to it. The charcoal heats the materials and releases their fragrance into the air. This has probably been the most common method of burning incense throughout history.
  2. Makk– makko powder is a natural combustible material from the Tabu-no-ki tree, which grows in parts of Asia. It is a powdered material that burns slowly but with high heat. An indentation is made in the ash using an ash press then the trail is filled with makko powder and compacted slightly using the ash press again (any small form that will make a one way path in the makko makes a fine ash press
  3. Mica – here we use the charcoal method of heating the incense ingredients but with the addition of a small mica plate placed either on top of the charcoal or we bury the charcoal in a cone-shaped mound of ash by using a flat butter knife or incense utensil. A vent hole is poked from the top of the mound of ash down to the charcoal and the mica is then placed on top of the hole and mound of ash. Small amount of the incense is sprinkled on top of the mica plate. Allow the mica to heat up and release the fragrances of the incense materials. This method will produce very little smoke yet still fill the room with rich fragrance. This method originates from Japan and is used for during their Koh doh and Kumiko ceremonies.

Okay, now that you have chosen what type of incense you wish to enjoy and what kind of incense burner you’ll use, it’s time to start enjoying the fine art of incense making.

The first thing we need is to assemble our list of tools and supplies to make and burn our incense.



  1. incense burner – filled with ash or sand
  2. natural incense ingredients – resins, woods and herbs
  3. charcoal or makko powder– makko is needed if making cones or sticks or for burning loose incense on top of makko
  4. tweezers – to hold charcoal while lighting it
  5. mortar & pestle / coffee grinder – to pulverize our ingredients into powders or you can omit this by starting with powdered substances – (however the freshest ingredients are obtained if you pulverize them yourself).
  6. distilled water or fragrant hydrosols – needed if making cones or sticks
  7. 2 mixing bowls or food grade plastic bags – to hold our pulverized ingredients until final mixing
  8. gram scale, measuring cup or spoons – to measure the ingredients in our recipes
  9. drying cloth or wax paper – for drying some recipes
  10. stirring spoon
  11. lighter or candle
  12. notebook – to record your recipes
  13. food processor – optional



The starting ground for making fine aromatic incense mixtures is using high quality natural ingredients. Start with some of your favorite woods and spices and experiment with new substances as you become more comfortable and intrigued with the process. Try to always use at least one resin or wood in your mixture as a base. Visit local herb shops, incense stores, nurseries, etc. to uncover hidden aromatic treasures. Here is a partial list of popular incense ingredients from around the world. Wine, honey, dried fruits and fragrant hydrosols are often used as well. Recipes and suggestions are listed later in this article. All ingredients should be stored in a dark, cool space, unless otherwise stated by the manufacturer.

Herbs Resins Woods
Chamomile flowers
Cinnamon bark
Calamus root
Cardamom seeds
Clove buds
Coriander seeds/fruit
Fragrant Grass
Galangal root
Ginger Lily
Herb Bennet
Iris flowers
Juniper berries
Juniper twigs
Lavender flowers
Rose, damask
Rose, French
Sage, White incense
Sage, garden
Sage, Russian
Sage, common
Star Anise
Sweet clover
Sweet Grass
Balsam – Peru
Balsam – Tolu
Balsam – Copaiba
Benzoin – Siam
Benzoin – Sumatra
Borneol Camphor
Copal – Gold
Copal – Black
Dragon’s Blood
Aloeswood / Agarwood
Cedar – Red
Cedar – Himalayan
Cedar – Atlantic
Cedar – Lebanon
Spruce – Australian
Spruce – Norway
Pine – Scotch



  1. If you are not starting with powdered ingredients then of course you must pulverize them using a mortar and pestle or coffee grinder. Electric coffee grinders produce too much heat, allowing for the loss of vital chemicals from the ingredients and therefore shouldn’t be used. Also, most resins will break the blades of electric coffee grinders.
  2. If you freeze your resins for a short while (1/4 hour or so), they will be much easier to pulverize. Resins usually can only be ground or powdered using a mortar and pestle. Woods are very difficult to pulverize with a mortar and pestle and really require the use of a hand crank coffee grinder of some sort or simply beginning with powdered woods.
  3. If you are just starting out making incense mixtures then you should keep the number of ingredients down to three (3) to begin with, perhaps one wood and two herbs, or one resin, one wood and one herb, etc. As you get used to making incense you can slowly expand the number of ingredients you use.
  4. So the first step is to choose the recipe you will use and gather the ingredients needed.
  5. Pulverize your ingredients by “class” by grinding woods first, then herbs and saving the resins for last. Resins, if young and soft, will make a mess of your mortar and pestle and its best to keep freezing them to get them powdered. Save them for grinding last, which allows you to grind everything in your recipe before you have to clean the mortar and pestle. Weigh each ingredient in your recipe after grinding, then keep one bowl for all the dry ingredients and another for all the resins.
  6. Mix all your dry ingredients together first (herbs & woods), separately mix all your resins together then add your resins mixture to your dry mixture and mix together thoroughly. Throw the completed mixture into the mortar and pestle again and grind it all together one last time to help blend the aroma of each ingredient into the others.
  7. Congratulations! You now have a “loose non-combustible incense mixture” and are ready to enjoy the aromatic treasure you’ve just created. Age the mixtures for a couple of weeks so that all the aromatics permeate into each other and produce a single bouquet of fragrances. You can heat this mixture over charcoal or on top of makko.

If you are making “incense pellets” or “incense cones or sticks” then you still have a little work to do.



  1. It’s quite simple to make pellets from any loose incense mixture. They add a richer fragrance to any mixture and more dimension to your incense making.
  2. There are many choices as to what you’ll use to bind your pellets. Many resins come in a pliable form permitting the “molding” of pellets. Labdanum is often used in recipes of Japan to form pellets, some called neriko, a recipe used in the fall and winter seasons as well as for tea ceremony. Simply combine all other ingredients first, then add them to the labdanum, or other pliable resin, and knead well. Dry these pellets in a ceramic jar with a lid for 2 – 3 weeks.
  3. Dried fruit can also be used to make incense pellets. Sultanas, Raisins or dried Prunes, and even dried Apricots. Honey may also be used in this process as a preservative for the dried fruit, and adds a delightful warm fragrance to a mixture. Honey itself can be used to form pellets from any dry mixture without the use of any fruit or pliable resins.
  4. Using about 1/2 – 3/4 of a cup of dried fruit for every 1 cup of loose incense mixture works well. We like to soak our dried fruit overnight in a heavy red wine before using. Once soaked overnight and drained, add the fruit to loose incense and use a food processor to blend this entire mixture together. If you do not wish to use a processor, then mix a small amount of fruit with a small amount of your mixture and mash it together with a mortar and pestle and continue this process until all of your mixture has pulverized fruit in it. Transfer the entire mixture to a mixing bowl and drizzle in about one teaspoon of pure honey for every 3/4 cup of dried fruit, knead this together very well. At this point you can either crumble the mixture with your hands and spread it out on a cotton cloth, cardboard, wooden board, wax paper, etc. and store it indoors, out of the sunlight, allowing it to dry. You can also form pea-sized balls with your hands and then spread them out to dry. Drying time can take 2-4 weeks depending on climate. The mixture should be turned daily for proper drying. Alternatively, you may also place your pellets in a ceramic jar with a lid and allow them to age for up to a year. In Japan, the ceramic jar is sometimes buried in the ground for up to a year. This type of mixture can be burned on charcoal, or directly on makko.



  1. Pulverizing your ingredients into a very, very fine powder is one of the keys to making cones or sticks that will burn properly. Follow the directions above for mixing ingredients as loose incense but grind everything to an ultra fine powder.
  2. There are many ways to make cones and sticks, some people use gum arabic (see Silverstone’s web site) or tragacanth to bind their sticks or cones. They mix this with charcoal or saltpeter to gain combustion.
  3. We’re sure there are a myriad of other ways to form sticks and cones. We’ll share our own method with you, which is to use makko (also known as tabu) to form incense cones and sticks. Makko is made from the bark of the tabu-no-ki tree, which grows in Asia and is a natural combustible material that is also water soluble. When added to loose incense mixtures with a small amount of distilled water or hydrosol, makko allows for the forming of incense cones or sticks. Because it is water soluble, the exact amount of makko to add to a mixture depends on the humidity of your environment and the amount of resins and woods in your mixture.
    First allow your “loose incense mixture” to sit at overnight to let the ingredients “blend” together. Once aged a day or more you are then ready to add your makko and form the incense into whatever shapes you desire. Test a small amount of your mixture first. You’ll need a mixing bowl, your hands and either distilled water or a fragrant hydrosol and some wax paper. If you have a mixture with no resins in it, then you will most likely need to add only between 10 – 25% of makko to your mixture. (i.e. If you use 4 tablespoons of loose mixture, try adding 1/2 – 1 tablespoon of makko). If you have resins in your mixture then you may need 25 – 80% makko in your mixture. Record in a notebook the exact measurements of your recipes so you can recreate the ones that come out perfectly and adjust those that don’t.
  4. Very slowly… add a little water and mix with your hands, you want the mixture to become gummy and pliable yet still hold form as you mold it. Using your hands, knead the mixture very, very well then form it into cones or sticks. Cones are relatively easy to form. To make sticks, use a piece of wax paper on a flat surface and roll the mixture into sticks with your hands. You may also wish to obtain blank bamboo sticks that have absolutely no additives and roll your mixture onto the sticks. Allow your cones or sticks to dry at least a couple of weeks – again this depends on climate. You want to keep them away from sunlight and heat during this time. Sticks will dry faster than cones. Cones you can tell are dry by turning them upside down and looking to see if there is any color difference in the center of the bottom compared to the outer edges. Once dry, light one of your creations and see how it burns and smells. If it doesn’t burn steadily, then you need to increase the amount of makko to the mixture. If you think it burns too fast, then decrease the makko content. A great thing about this method is you can grind up any cones or sticks that didn’t come out right and adjust the makko content by adding more makko or more loose incense mixture to them, add a little water and begin again.


Incense Recipes

Here’s a list of recipes to get you stared, have fun experimenting and enjoying new mixtures.


1 part sandalwood *
1/2 part cassia (Chinese Cinnamon)
1/2 part clove
2 parts sandalwood *
1 part benzoin *
1 part star anise *
1 part cassia
1/2 part rose mallow seeds
2 parts frankincense *
1 part sandalwood *
1 part aloeswood *
1 part clove
1 part cinnamon
2 part sandalwood *
1 part galangal *
1 part myrrh *
1/2 part cinnamon
1/2 part borneol (camphor) *
3 parts gold copal *
1 part dark copal *
1 part myrrh *
1 part balsam of tolu
1/2 part vanilla
4 parts juniper tips *
2 parts white sage *
2 parts sweet grass *
2 parts sandalwood *
1 part mastic *
1 part myrrh *
1 part cinnamon bark
1 part spikenard *
handful of dried rose petals *
1 part storax *
1 part frankincense*1 part cassia
1 part sandalwood *
2 parts sandalwood *
1 part frankincense *
1 part mastic *
1 part lemongrass
2 parts frankincense *
1 part myrrh *
1 part cedar *
1/4 part pinion pine *
2 parts frankincense *
1 part myrrh *
1 part mastic *
1/2 part coriander
2 parts cedar *
1 part vetiver *
1 part lavender flowers*
1/2 part benzoin *
handful of dried rose petals *

Disclaimer: The above is for information purposes only. Lucid Angel’s Wonderland in no way takes any responsibility in the event that anyone using the above information receives an outcome other than expected or desired. Anyone wishing to make incense should rely on their own research & advice from professionals. The above information has been collected by Lucid Angel’s Wonderland from online articles and in no way professes to own such content.
This information may be updated from time to time to reflect new knowledge.


Additional Loose Incense Recipes:


Do you like floral and fruity? Woodsy? Spicy and delicious? Resinous? You can create any of these scents, or combine them to come up with your own unique combination.


Herbs and Spices

You can burn almost any herb or spice for incense. To choose the right ones, just use your nose. (Clove, cinnamon and cardamom are lovely, but unconventional choices like fennel can really spice things up!)

Grind them with a coffee grinder to create a finely ground powder. You can also use a mortar and pestle, or a hand-crank grinder.


Seeds and Nuts

Choose nuts and seeds that smell delicious when they roast, like almonds or pumpkin seeds. You can use an electric grinder for these, or use your mortar and pestle to break them down, and finish the job with your hand-crank.


Fruit and Berries

We recommend drying these out first. You can slice fruit and dry it in your oven. Or use a fruit peeler or cheese grater to create small bits of the skin or rind. Orange zest makes a wonderful incense ingredient! After drying fruit slices, grind them up into smaller pieces. If you’re using citrus zest, just let it dry and you’re good to go.


Gums and Resins

These are some of our favorite incense ingredients! But they can be tricky to work with. Try freezing them first to reduce the gumminess. You don’t want to put these in an electric grinder. Even frozen, they could seriously gum up the works. The best way to do it is also the oldest—with a mortar and pestle. You won’t get a fine grind, but that’s okay. Resins release strong aromas even when burned in larger chunks.


Wood and Bark

Another tricky one. Use a small hammer and wood chisel on a cutting board to whittle wood down into rice-sized chips. (Tip: It’s best if the cutting board isn’t made of wood, which might dent or divot under a chisel.) You don’t need to make a powder here, but once your chips are small enough, you can grind them further with a hand-crank or electric grinder.


These are just a few popular incense ingredients. You can really use any natural, safe substance that burns. It doesn’t even have to produce a pleasant scent, depending on your purposes.


Lucky in Love Incense

This blend can strengthen your heart, encouraging it to open and keeping it protected at the same time. Cedarwood is also said to bring good fortune!

  • ½ oz rose (dried petals, buds, or powdered petals)
  • ½ oz cedarwood chips

Use a 1 oz jar for your blend. Just stir the rose petals (or powder) in with the cedar chips. You can also close your container and shake it up.


Intention Setting Incense

Frankincense is famous for meditation because it helps the mind center and focus, inspires altered states, and relaxes the nervous system. Orange is uplifting and bright, and clove adds a touch of spice. This blend helps you feel optimistic, passionate, and focused on your intentions for 2015.

  • 1 oz frankincense resin
  • ½ tsp crushed cloves
  • 10 drops orange essential oil (Citrus sinensis)

If your cloves aren’t already crushed, you can crush them with a mortar and pestle, a hand-crank grinder, or coffee grinder. They don’t have to be crushed into a fine powder. It’s okay if they’re in small chunks!

Put your frankincense resin in a 1 oz jar, and stir in the crushed cloves. Then add your drops of essential oil, stirring as you go.


Prosperity Incense

For this loose incense recipe, we recommend adding an ingredient that’s found abundantly in your local area. This could be apples (use dried apple peel), citrus (dried orange peel), or pine trees (crushed cones or fragrant needles). It could also be something you have plenty of on hand. (Do you always seem to have several containers of basil leaves? Use them!)
  • ¾ oz myrrh resin
  • ½ tsp allspice
  • ¼ oz dried and crushed mint leaves
Use the myrrh resin as your base. It’s known to open your heart and mind to receiving gifts! Stir in your allspice and mint leaves, and then add your own ingredient. We like to put our incense burner on top of a dollar bill when burning this blend.


Get creative, and burn baby burn (safely, of course)!

Disclaimer: The above is for information purposes only. Lucid Angel’s Wonderland in no way takes any responsibility in the event that anyone using the above information receives an outcome other than expected or desired. Anyone wishing to make incense should rely on their own research & advice from professionals. The above information has been collected by Lucid Angel’s Wonderland from online articles and in no way professes to own such content.
This information may be updated from time to time to reflect new knowledge.

Join our groups:

BeWitchy® BeWitchy is a registered trademark
© Copyright Protected 2015-2021


Leave a comment

Please note, comments must be approved before they are published